Bracelet de montre en cuir d'alligator patiné jaune rembourré
$105.00
Lug & Buckle Width
Lug width is the gap between the two lugs of your watch case, where the strap fits. Your strap has to match it exactly.
Most watches are 18, 20 or 22 mm. Measure inner edge to inner edge with a ruler — or flip your old strap over: the width is often printed inside.
Our sizes read lug / buckle: 20 / 18 mm is 20 mm at the watch, 18 mm at the buckle. Only the first number has to match your watch.
Widths we cut
- 12
- 14
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- mm
Another width? Choose Custom and enter your own.
Buckle width
The width of the strap where the buckle sits — the second number in our sizes. 20 / 18 mm means 18 mm at the buckle.
Every strap comes with a matching buckle. Keeping your own? Measure across the inside of its frame and choose Custom.
Not sure? Email support@xilugs.com with your watch’s brand and model — we’ll confirm before we cut.
Strap Length Guide
Every strap has two parts: the long end with the holes and the short end with the buckle. 115 / 70 mm means 115 mm long, 70 mm short.
Wrap a soft tape — or a paper strip — just above the wrist bone. Snug, not tight. Then find your size below.
Find your size
Suggested fit. Watch over 44 mm: go one size shorter. Like it loose: one size longer.
| Long / Short | Your wrist |
|---|---|
| 105 / 65 mm | up to 14.5 cm |
| 105 / 70 mm | 14.6 – 15.5 cm |
| 115 / 70 mm | 15.6 – 16.5 cm |
| 115 / 75 mm | 16.6 – 17.5 cm |
| 125 / 75 mm | 17.6 – 18.5 cm |
| 125 / 85 mm | 18.6 – 19.5 cm |
| 135 / 85 mm | 19.6 – 20.5 cm |
| 135 / 95 mm | 20.6 – 21.5 cm |
| 135 / 105 mm | 21.6 – 22.5 cm |
| Custom size — type your own lengths | |
Between two sizes? Take the larger one — or choose Custom and enter your own lengths.
Not sure? Email support@xilugs.com with your wrist size — we’ll confirm before we cut.
Straight or curved end?
This is the end of the strap that meets your watch case.
Straight end — cut straight across. Fits almost any watch; a small gap at the case is normal.
Curved end — cut in an arc to follow the round edge of the case, so the strap sits flush with no gap. Tell us your watch brand and model and we’ll match the curve.
Not sure? Choose Straight — it fits everything.
Not sure? Email support@xilugs.com with your watch’s brand and model — we’ll confirm before we cut.
Keepers
The two small leather loops on the buckle half — the strap tail slides through them so it lies flat.
- Match leather — both loops in the strap's own leather.
- One colour — one colour for both loops.
- Two colours +$5 — the Top loop and the Bottom loop each in their own colour.
Tap the guide to zoom in — drag to move around.
-
FlatEven thickness, no padding.
2.5–4.5 mm
-
Padded DomedBuilt up in the middle and rounded down to thin edges.
3.5–5.5 mm
-
Padded SquareA raised centre with a flat top and crisp squared shoulders.
3.5–5.5 mm
-
Padded FullPadded edge to edge, the thickest profile.
3.5–5.5 mm
On padded straps the number is the height at the centre; the edges are thinner.
- Thin dress watch (case under 10 mm)2.5–3.5 mm
- Everyday watch (10–13 mm)3.5–4.5 mm
- Sports / diver / large case (over 13 mm)4.5–5.5 mm
A good rule: the thicker the watch case, the thicker the strap can be.
Check the gap between your lugs and the case. Some watches have a tight gap, and a thick padded strap may not fit. If unsure, send us a photo of your watch in the Note / Watch Photo fields and we'll confirm before cutting.
Need a size not listed? Choose Custom and enter it.
Not sure? Email support@xilugs.com with your watch model — we'll recommend one before we cut.
Standard pins, hidden inside the strap. Swap with a spring-bar tool.
Small lever on the back. Swap by hand in seconds, no tools.
Warm honey tan; deepens with wear.
Light neutral sand; stays clean and quiet.
Conçu pour un usage quotidien
Structure du bracelet de montre
Chaque bracelet est conçu autour des trois détails qui déterminent comment il se porte à votre poignet — et non ceux qui sont simplement photogéniques.
-
01
Barres à ressort à démontage rapide
Choisissez entre des barrettes à ressort à changement rapide ou classiques. Nous les installons avant l'expédition afin que vous puissiez changer de bracelet en quelques secondes, sans outil et sans rayer les cornes.
-
02
Doublure Zermatt douce
La doublure est en cuir Zermatt souple et résistant à l'eau, assurant un confort optimal au contact de la peau tout au long de la journée, même par temps chaud.
-
03
Votre nom sur la doublure
Des initiales ou un nom, estampillés gratuitement sur la doublure, pour que la pièce à votre poignet soit unique au monde.
EMBALLAGE
Chaque bracelet est livré dans une boîte en bois.
Pas d'enveloppes, pas de pochettes en plastique. Chaque commande XILUGS est expédiée dans notre propre boîte en bois, doublée d'une mousse antichoc permettant de maintenir en toute sécurité jusqu'à quatre bracelets. Un outil pour barrettes à ressort est inclus à l'intérieur, afin que vous puissiez installer votre nouveau bracelet dès son arrivée, et la boîte permet de protéger votre collection bien après.
- Boîte en bois avec chaque commande
- Peut contenir jusqu'à 4 bracelets
- Insert en mousse antichoc
- Outil pour barrettes à ressort inclus
Vous aimerez peut-être aussi
-
Vintage Cognac Patina Alligator Leather Watch Strap
Prix habituel $105.00 USDPrix habituel -
Bracelet de montre en cuir d'alligator patiné citron noir
Prix habituel $105.00 USDPrix habituel -
Bracelet de montre en cuir d'alligator patiné olive noir
Prix habituel $105.00 USDPrix habituel -
Bracelet de montre en cuir d'alligator plat patiné rouge et noir
Prix habituel $105.00 USDPrix habituel
New design — no reviews yet. Here’s what customers say about our shop:
